Mitsubishi Electric C80 Series Connection And Set Up Manual page 170

C80 Series Connection and Setup Manual
10 PLC CPU Initial Setup
(6) When connecting two units of CNC CPU, perform the following setting.
(a) Set <Detailed Setting> under "Memory/Device setting" - "Device/Label Memory Area Setting" - "Device/Label
Memory Area Detailed Setting" - "Device Setting".
Link relay B: "24" (24K Word)
(7) When connecting three units of CNC CPU, perform the following setting.
(a) Set "Device/Label Memory Area Capacity Setting" under "CPU Parameter" - "Memory/Device Setting" -
"Device/Label Memory Area Setting".
Device Area Capacity under "Device Area": "48" (48K Word)
File Storage Area Capacity under "Label Area": "120" (120K Word)
(b) Set <Detailed Setting> under "Memory/Device setting" - "Device/Label Memory Area Setting" - "Device/Label
Memory Area Detailed Setting" - "Device Setting".
Link relay B: "32" (32K Word)
Data register D: "26" (26K Word)
139 IB-1501452-C