Clearing The Password - Mitsubishi Electric C80 Series Connection And Set Up Manual

C80 Series Connection and Setup Manual
18 Appx.1: Protection Setting

18.5 Clearing the Password

Operation Methods
(Example) Clear the password of operation level 4
(1) Press the menu [Change pasword].
(2)
Use [ ↑ ] or [ ↓ ] key to move the cursor to the operation
level where you want to change the password. (Operation
level 4 in this case)
(3) Enter the current password for the operation level of the
cursor position.
(Example) OLDPASS [INPUT]
(4) Enter "0".
(Example) 0 [INPUT]
(5) Press the [Y] or [INPUT] key.
(Note 1) Clearing the password is available only for the lower operation level than the current one.
IB-1501452-C
The menu [Change pasword] is highlighted.
The operation message "Enter the current password." is
displayed.
The cursor appears on the current operation level.
The operation message "Enter the current password." is
displayed.
<When the password is correct>
The operation message "Enter a new password." is displayed.
<When the password is incorrect>
The operation message "Your password is incorrect." is
displayed, and then the operation returns to the process (2).
The operation message "Clear the password? (Y/N)" is
displayed.
<When pressing [Y] or [INPUT] key>
The operation message "Password has been cleared" is
displayed, and then the password returns to the initial one.
The highlighted menu [Change pasword] returns to normal.
<When pressing other than [Y] or [INPUT] key>
The operation message disappears and the password stays
the same.
The highlighted menu [Change pasword] returns to normal.
244