Gx Works3; Connecting The Devices Necessary For Setup - Mitsubishi Electric C80 Series Connection And Set Up Manual

C80 Series Connection and Setup Manual
10 PLC CPU Initial Setup

10.1 GX Works3

10.1.1 Connecting the Devices Necessary for Setup

Connect the personal computer in which the sequence program development/maintenance tool GX Works3 is installed
to the PLC CPU with USB.
RCPU (The explanation is an example using R04CPU.)
(Note 1) When connecting to a personal computer and a unit with the USB interface, an electric shock or a unit failure
may occur.
Be sure to refer to "Items related to connection" on "Precautions for Safety" before connecting them.
IB-1501452-C 134
GX Works3