Mitsubishi Electric C80 Series Connection And Set Up Manual page 199

C80 Series Connection and Setup Manual
11 CNC CPU Initial Setup
(c) Device setting of NC3
(Note)
(c-1) Perform the device setting on CPU1 side of NC3.
CPU1 (PLC CPU side): Setting example of three units of CNC CPU, 2-part system and 8 control
axes
(c-2) Perform the device setting on CPU2 side of NC3.
Press [Next CPU] at the bottom right. Confirm that [CPU2] is displayed in the top right.
CPU2 (CNC CPU side): Setting example of three units of CNC CPU, 2-part system and 8 control
axes
IB-1501452-C
When the [Execute init.] menu is pressed at NC3, the settings for (c-1) to (c-4) are performed
automatically.
168