Mitsubishi Electric C80 Series Connection And Set Up Manual page 185

C80 Series Connection and Setup Manual
11 CNC CPU Initial Setup
(9) When the type of the NC system is Lathe system, perform (a) and (b) below.
(a) Select [Para No search], enter "1007" in the setting area and then press [INPUT] key.
The screen will move to the basic system parameter screen and the cursor will move to the "#1007 System
type select".
(b) Enter "1" in the setting area and press [INPUT]. (0: Machining center system, 1: Lathe system)
(10) Turn the power OFF and ON.
IB-1501452-C 154