Panasonic PV500 User Manual page 285

Outputting to a SD memory card
A folder named as date and time (YYMMDDHHMMSS= year, month, day, hour, minute, second) is created in
the following path of a SD memory card and image files are saved in it.
¥Panasonic MEW Vision¥PV500¥Image¥Output¥
Initially, decide the number of folders to save images. When using a SD memory card with PV500, it has a limit
that up to 100 files can be saved in per folder. Thus, the specified number of folders by 100 files can be saved.
Select either overwriting from older files or terminating image saving when the number of files reaches the
saving limits.
1.
Select "No. of Folders".
The default is "10" and the range of available value is "1 to 1000".
2.
Set "Overwrite".
[No] (Default): Terminates image saving.
[Yes]: Deletes the oldest folder and all images stored in the folder, and creates a new folder to
continue saving.
Outputting through Ethernet
When the PC has an error, such as uninvoked Image Receiver and disconnection of cables, images cannot be
output correctly. Decide the operation of PV500 in such case.
When "Output Conditions" is set to "Command Reception", two items described below cannot be selected. In
this case, if outputting an image failed, ERROR1 signal will be output.
1.
Set [ERR signal ON at Output Error].
To turn on the ERROR0 signal when an error occurs, select "Yes". (Default: No)
2.
Set [Forced Outage at Output Error].
[No] (Default):
[Yes]:
3.
Set "Timeout (s)". (Available from Ver.2.22)
When this set time is elapsed, the output error occurs. (Default: 10 seconds)
Specifying a Camera Image to Output
You can set images to output or not by a camera.
1.
Select "Yes" in "Camera No.0 Output" of "Image Output".
Doing so makes setting that an inspection image of camera No.0 is output.
2.
In the same way, set a Camera No. to "Yes" to output its image.
Continues the inspection.
Terminates the inspection. Confirm the connection following the displayed message.
When outputting Synchronously, images can be resent.
283