Panasonic PV500 User Manual page 189

1.
Select "Approximate Line Detect Condition" > "Detect Mode".
2.
Select a desired Detect Mode from the list.
Depending on the selected Detect Mode, detected data items to be displayed at the bottom of the screen
vary.
Detect Mode
• Measure
Deviation
• Measure
Distance
• Measure Width
Graph: Refer to page
189.
About Data to be displayed
Measure
Deviation
(a) Angle of approximate line
(b) Linearity of approximate Line
(c)
Standard
deviation of
deviations
(d) Max. deviation
Min. deviation
Average deviation
About Detected Line (Approximate Line)
It is a line that is calculated with the
coordinate values of the edges of an
object detected by each cell.
Two detection methods are available.
"General Mode" which uses the
coordinate values of all detected
edges and "Details Mode" which does
not use the coordinate values of
convex or concave of an object for
calculating the line.
Measure Distance Measure Width
Angles of approximate lines 0 and 1
Linearity of approximate lines 0 and 1
Standard Standard deviation of width
deviation of
distance
Max. distance Max. width
Min. distance Min. width
Average distance Average width
187