Reading Setting Data - Panasonic PV500 User Manual

4.17.2 Reading Setting Data

The setting data registered in the Storage Space in PV500 or a SD memory card can be called up to the
execution memory. The setting data that has been stored in the execution memory will be overwritten. Before
reading, save the setting data as necessary.
1.
Select "SAVE/READ" from the menu bar.
2.
Select "Read Setting Data".
The setting data reading window is displayed.
3.
Select "Storage Space in PV500" (or "SD card") for
"Read From".
4.
Select the list and the data to read. Reading is
executed.
Reading is executed.
To stop reading during the process, select "Abort". In
this case, the data of Type and ENVIRONMENT will be
initialized.
Compatibility of Setting Data
Version
When reading the setting data created in the later version of PV500 than the current one, the data may not be
read depending on the version where the data was created. The compatibility of setting data in each version is
as follows:
Current version
Ver.2.30
Ver.1.60
Ver.1.50
Ver.1.40 to 1.43
Ver.1.30
Ver.1.20 to 1.22
Ver.1.10 to 1.14
Ver.1.02 or before
Camera Type
The data of PV500s with different camera types are compatible.
Two-camera type product can read the setting data created by 4-camera type, and vice versa.
290
Readable setting data
Ver.2.30 or older
Ver.1.60 or older
Ver.1.50 or older
Ver.1.43 or older
Ver.1.30 or older
Ver. 1.22 or older
Ver.1.14 or older
Ver.1.02 or older