Panasonic PV500 User Manual page 324

Arranging a Data R/W Window
The data and the number of cells displayed in a Data R/W window can be specified from "TYPE" > "Data R/W"
in SETUP menu.
In RUN menu, the items listed below can be set.
·
Changes the position and size of the windows. The procedure is the same as the
Position/ size:
one of screen windows.
·
Sets the width of cells to display data by the columns.
Cell width:
·
Sets whether the transparence applies to Data R/W windows or not.
Translucent:
·
Displays or hides the frame when multiple cells are shown.
Frame display:
1
. Press the F1 key.
The list of currently displayed window is displayed.
2.
Operate the ENTER key to select a Data R/W window to modify.
3.
Press the FUNC key and select "Move" or "Size"
from the pop-up menu.
Move the window by operating the ENTER key and
specify the size. The procedure is the same as the one of
screen windows.
4.
Select the column to change its cell width and press the FUNC key.
The cell width can be specified by a column basis.
5
. Select "Cell Width" from the pop-up menu.
The setting window is displayed. Specify it in pixels according to the digit of the displayed data.
Even when Calibration is employed, specify the cell width in pixels.
6.
Specify the value and press the ENTER key.
The cell width is changed. Change the cell width of other columns if needed.
7.
Press the FUNC key and select "Translucent" from the pop-up menu.
The Data R/W window is displayed in the "Transparence" specified in VIEW menu.
As you open the pop-up menu, "Translucent" is checked.
Selecting "Translucent" again cancels to apply the transparence and the window is displayed in 0% of
transparence.
8
. Press the FUNC key and select "Hide Frame" from the pop-up menu.
The frame line is undisplayed.
As you open the pop-up menu, "Hide Frame" is checked.
Selecting "Hide Frame" again displays the frame.
322