Panasonic PV500 User Manual page 223

Setting Judgement Condition
Measurement conditions vary depending on the type of geometry calculation.
Detect mode
Distance Point-Point
Intersecting Point
Median of Two Lines
Distance Point-Line
Approximate Line
Approximate Circle
Approximate Ellipse
Maximum and Minimum Values of Line Angle
As for Line Angle, the maximum value can be set to a smaller value than the minimum value (Max. value < Min.
value). Set the values checking the guide display.
In the example on the right, it will be judged
as OK if the detected angle is in the range of
"290 to 70 degrees".
In the example on the right, it will be judged
as OK if the detected angle is in the range of
"110 to -110 degrees".
Judgement limits
Median X, Median Y -99999999.999 to 99999999.999
Distance 0 to 99999999.999
Line Angle 0 to 359.999(When Angle Range is 0<->360)
-179.999 to 180.000 (When Angle Range is -180<->180)
IP X, IP Y -99999999.999 to 99999999.999
Angle 0 to 359.999
Angle 0 to 359.999
Line Angle 0 to 359.999 (When Angle Range is 0<->360)
-179.999 to 180.000 (When Angle Range is -180<->180)
Pedal X, Pedal Y -99999999.999 to 99999999.999
Distance 0 to 99999999.999
Pedal Angle 0 to 359.999 (When Angle Range is 0<->360)
-179.999 to 180.000 (When Angle Range is -180<->180)
Line Angle 0 to 359.999 (When Angle Range is 0<->360)
-179.999 to 180.000 (When Angle Range is -180<->180)
Standard Deviation 0 to 99999999.999
Center X, Center Y -99999999.999 to 99999999.999
Radius 0 to 99999999.999
Standard Deviation 0 to 99999999.999
Center X, Center Y -99999999.999 to 99999999.999
Major Axis 0 to 99999999.999
Minor Axis 0 to 99999999.999
Major Axis Gradient 0 to 359.999 (When Angle Range is 0<->360)
-179.999 to 180.000 (When Angle Range is -180<->180)
Standard Deviation 0 to 99999999.999
Input range
221