Panasonic PV500 User Manual page 183

Setting Judgement Limits
1.
Select the table of maximum/minimum values in "Judgement Limits" setting window.
2.
Specify the maximum and minimum measurement values of radius (diameter/width).
As the maximum and minimum measurement values are displayed at the bottom of the screen, make the
setting checking it.
In addition, red lines indicating the maximum and minimum values are displayed in the graph. Confirm
them and set.
3.
Specify the maximum and minimum values of standard deviation and circularity.
As the current value of each condition is displayed at the bottom of the screen, make the setting checking
it.
4.
Specify the maximum value for "Unused Edge Count".
The current value of the unused edge count (test result) is displayed on the left of the screen. Confirm it
and set.
The default for the maximum number of settable cells is 3597.
181