Panasonic PV500 User Manual page 404

Type Switch
% X ?
Send
Receive % X
Error (ERROR 1 signal = ON)
% X
Error code
200
210
211
Saving Setting Data
Saving in the Storage Space in PV500
% M W ?
Send
Receive % M W $
Error (ERROR 1 signal = ON)
% M W !
Error code
200
212
Saving in a SD memory card
% C W ?
Send
Receive % C W $
Error (ERROR 1 signal = ON)
% C W !
Error code
200
212
216
402
? ? BCC CR
$ BCC(59) CR
! Error code (3-digit)
Operation is stopped
• The specified product number does not exist.
• Other number than 000-255 was specified for a product number.
When waiting for Individual Trigger input*, image capturing of the rest of the
cameras or Abort Inspection/Process is not executed in 10 seconds after
sending the command to execute Type Switch. (This condition does not apply
when Individual Trigger Timeout is set to "Yes")
* The status where the device is waiting for the rest of camera triggers after
receiving some of the camera triggers.
? BCC CR ?? = 00 - 99 (Storage area No. of PV)
BCC(1B) CR
Error code (3-digit)
Operation is stopped.
Other number than 00-99 was specified for a saving area number.
? BCC CR ?? = 00 - 99 (Storage area No. of a SD memory card)
BCC(15) CR
Error code (3-digit)
Operation is stopped
Other number than 00-99 was specified for a saving area number.
• No SD memory card is attached or cannot be accessed.
• Capacity of the SD memory card is used up.
• The SD memory card is write-protected.
??? = 000 - 255 (Product type No.)
BCC CR
BCC CR
BCC CR