When aborting save/read setting data,
•
The command to abort is sent other than when saving/reading
setting data.
•
Aborting failed.
When switching between Run and Stop
•
Specification of the parameter is wrong. (A number
other than 0 and 1 was specified.)
•
PV500 sent a command in the following inoperable
state.
–
When selecting "TOOL" > "General", "Setting Help"
or "Update
–
When displaying SETUP menu when "Run Mode in
SETUP Menu" is set to "Not Available"
376
E0217
E0240
Switch to RUN menu.
Make PV500 be operable.