Panasonic PV500 User Manual page 406

Abort Save/Read Setting Data
% C D
Send
Receive % C D $
Error (ERROR 1 signal = ON)
% C D
Error code
217
Saving Images Stored in the Image Memory of PV
into a SD Memory Card
Data is saved into free area of the SD memory card. (A destination number cannot be specified.)
Send % S S
% S S
Receive
Error (ERROR 1 signal = ON)
% S S
Error code
200
260
Clearing the Image Memory Stored in PV
Execute "SAVE/READ" -> "Clear Image Memory" in SETUP menu.
% S R
Send
Receive % S R $
404
BCC CR BCC=22 or **
BCC(06) CR
! Error code (3-digit)
• Saving or reading setting data is not executed.
• Aborting failed.
BCC = 25 or **
BCC CR
$ BCC(01) CR
! Error code (3-digit)
Operation is stopped
• No SD memory card is attached or cannot be accessed.
• Capacity of the SD memory card is used up.
• The SD memory card is write-protected.
• No blank folder exists in the destination. (All of 00-99 folders are used.)
• No image is saved in the image memory.
BCC CR
BCC(00) CR
BCC CR
BCC CR
BCC = 24 or ＊＊