Ftp-Server Topdir - Dell C9000 Series Reference Manual

ftp-server topdir

Specify the top-level directory to be accessed when an incoming FTP connection request is made.
C9000 Series
Syntax
ftp-server topdir directory
Parameters
directory
Defaults The internal flash is the default directory.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
E-Series
Usage Information After you enable FTP server functions with the ftp-server enable command, Dell
Networking recommends specifying a top-level directory path. Without a top-level
directory path specified, the system directs users to the flash directory when logging in
to the FTP server.
Related
ftp-server enable
Commands
ftp-server username
Enter the directory path.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
— enables FTP server functions on the switch.
— sets a username and password for incoming FTP connections.
Control and Monitoring 92