Disable - Dell C9000 Series Reference Manual

disable

Return to EXEC mode.
C9000 Series
Syntax
disable [level]
From a port extender (PE) console, use disable [level] to return to EXEC mode.
Parameters
level
Defaults 1
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
E-Series
Usage Information You can also use the disable command from port extender(PE) console to turns off
access to the privileged mode commands.
(OPTIONAL) Enter a number for a privilege level of the Dell
Networking OS. The range is from 0 to 15. The default is 1.
Description
Introduced on the C9010 and C1048P.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
Control and Monitoring 83