Mitsubishi Electric MELSEC iQ-R Series User Manual page 139

Clear Error
Click the [Clear Error] button in the Error Information tab page in the Module Diagnostics window to execute this function.
This clears all the continuation errors of the RJ71CN91.
The following table lists errors and whether they can be cleared.
: Can be cleared, : Cannot be cleared
Error name
Continuation error
Stop error
The following table shows which error notifications/indications can be cleared by the "Clear Error" operation.
: Can be cleared, : Cannot be cleared
Clear target
Module
GX Works3
■Procedure for clearing error
Clear errors using the module diagnostics function of GX Works3. ( GX Works3 Operating Manual)
Precautions
• Errors cannot be cleared while a stop error exists.
• Errors may occur and be detected again if the error causes are not removed or another error occurs after clearing.
Level
Minor error
Moderate error
Major error
ERR LED
Each error information in buffer
memory
Error status on the system monitor
window
Error codes on the system monitor
window
Error information on the Module
Diagnostics window
Event history
Whether it can be cleared



Whether it can be cleared






5.2 Checking the Module Status
Status after error clear
Off

No error
No error code
No error Information

5 TROUBLESHOOTING
137
5