NorthStar MX500 Operator's & Installation Manual page 90

Operator's Manual
Take a quick look at both screens. They both have a graphical area to
the right, and a text data area to the left.
In the PLOT screens the UP arrow key is the Zoom-out key; the
DOWN arrow key is the Zoom-In key. Each time you depress one of
these arrow keys, you scale by one-half or by double the graphical
area. If you look to the top of the screen, just right of the page num-
ber (PLOT 1 or PLOT 2), you will see a number in a white square.
This is the scale of the graphic window based on the units selected in
CFG1 Navigation. Now look along the left and right edge of the
graphic window, you will see some vertical black and white dash
marks (these are harder to see at small scales like 1 and 2 or at large
values such as 64 or 128). Each solid dash mark represents 1 nauti-
cal mile. A broken dash mark indicates 1/100th of a nautical mile
when you are zoomed in at low scale. You will find your bearing and
range to the next waypoint (PLOT1) or marker position (PLOT2)
just below the page number. The PLOT2 screen also provides the
marker coordinates and the datum currently in use (set in CFG1
Datum).
The CFG1 Navigation menu allows you to display fractions of the
major unit (nautical miles, statute miles, or kilometers) ranges less
than 1000 in alternate units of feet or meters.
76
Plot
Version 3.0