Ethernet Switches - NorthStar MX500 Operator's & Installation Manual

MX500 Overview
The table 1a below shows all the waterproof network cables that
BNT-ME offers for the MX 500.
Item
Table 1a: MX 500 Waterproof Network Cables

Ethernet Switches:

Ethernet switches allow for the interconnection of more than two
MX 500 units. Each MX 500 can exchange data with any other
MX 500 connected to the switch.
For non-waterproof switches, any standard 10/100 Mbit Ethernet
switch can be used. These devices generally come with a power
adapter which is plugged into a 110VAC (or 220VAC) power
outlet.
Fully waterproof, 10-32VDC powered switches are available from
Woodhead Connectivity Ltd.
BNT-ME recommends the following Ethernet switches using
standard Category 5 cables:
Version 3.0
Component
LAN Patch Cable Assembly (3 m)
1.0
(RJ45, single-ended waterproof
connector)
1.1 LAN Cross-over Cable (3 m)
(RJ45, double-ended waterproof
connectors)
Manufacturer
Netgear
ADAM
Table 1b: Ethernet Switches
Type
CAT5
Cross-over
Model Northstar P/N
FS108
SW103
6520
Operator's Manual
Part Number
500 100 4004
500 100 4005
Ports
Speed(Mbits)
8
10/100 Auto
5
5