Configuration; Alarms - NorthStar MX500 Operator's & Installation Manual

Configuration

Configuration
The CFG screen includes setup and control of all of the receiver's
primary functions. There are more than 20 separate configuration items
in this screen. The display is divided into two windows. The left hand
window identifies the primary configuration items. The right hand win-
dow displays the current settings. Use the cursor key to select a con-
figuration item of interest, then press the EDIT key to edit the actual
settings. There are some settings which can not be changed; however,
these are displayed so that you have a better understanding of exactly
how the receiver is configured. The Item list is arranged alphabetically
based on the language chosen. This section of the manual is arranged
alphabetically for English. You may choose to skip to only the items
that interest you at first, then read this complete section at a later time.
No

Alarms

This screen allows you to quickly see which alarms are active and
inactive. The list of available alarms is interactive with the remaining
screens described in this section. Therefore, changing the state of the
alarm in a screen such as Anchor from Off to On will also cause the
anchor alarm in this screen to go from Off to On. Likewise, if you turn
the anchor alarm from On to Off in this screen the Anchor screen will
also match this one.
Version 3.0
te: The configuration list is too long to show in one page of
the display. To view all of the configuration menu, scroll
through to the bottom of each list with the cursor key.
Operator's Manual
107