Keypad & Display Description - NorthStar MX500 Operator's & Installation Manual

Keypad & Display Description
Keypad & Display Description
Refer to the illustration above. The Traffic Lights on the left side of
the display will tell you how your navigator is operating.
Note: You need to take care in reading the traffic light indica-
Version 3.0
tions, as there are overlapping possibilities between the
GPS and DGPS modes. If you are unsure of the current
operating mode, select the CFG function key and scroll
down to the DGPS selection. If the DGPS mode is selected
to anything other than Off, then follow the Differential GPS
Traffic Light Operation. If the DGPS mode is selected to
Off, then follow the GPS Traffic Light Operation.
Display
Traffic
Lights
USB
Connector
Cursor Key
Operator's Manual
Function Keys
Select
Virtual Softkey
11