Usb - Usb Mass Storage Configuration - NorthStar MX500 Operator's & Installation Manual

Configuration

USB - USB Mass Storage Configuration

This option controls the saving and restoring of your waypoints, routes,
and system configuration via an external USB device. In the event
where you do a software upgrade for your MX500 CDU for example, all
your waypoints, routes, and system configuration will be lost. This
option allows you to save them to a USB device (i.e. USB flash drive)
beforehand, and restore them from your USB device after the software
upgrade is completed. This way, you do not have to manually re-enter
all your waypoints, routes, and system configuration settings.
To implement this feature, plug your USB device into the USB port of
the MX500 CDU first, and change USB Connected to Yes. Allow a few
moments for the CDU to read and detect your USB device. Ensure that
status displays Connected before continuing.
Select the data type, either Waypoints, Routes, Config, or All by using
the Change softkey.
Waypoints:
Routes:
Config:
All:
Version 3.0
This sets the CDU to save (Save to USB softkey) or restore (Re-
store softkey) your waypoints using your USB device.
Select routes will set the CDU to save (Save to USB softkey) or
restore (Restore softkey) your routes using your USB device.
Allows the CDU to save (Save to USB softkey) or restore (Restore
softkey) your system configuration settings using your USB de-
vice.
Allows the CDU to save (Save to USB softkey) or restore (Restore
softkey) your waypoints, routes, and system configurations all at
once.
Operator's Manual
147