NorthStar MX500 Operator's & Installation Manual page 148

Table of Contents

Advertisement

Operator's Manual
Most:
134
cept GGA, which provides a selection in the Details screen
to output in either WGS-84 or the datum selected in CFG/
Position.
NMEA Version - Some of the NMEA 0183 records are no longer
supported by version 2.3. However, you may have an autopi-
lot, plotter, or other older model equipment that does not sup-
port the newer version of the NMEA 0183 standard. The re-
ceiver provides you the flexibility to interface using older ver-
sions of the NMEA standard to support these devices.
Decimals In Lat/Lon - The software allows you to select from 2 to
5 decimal places in records containing position or waypoint
information.. The receiver provides you the flexibility to match
the expected input on these devices.
Decimals In BRG or HDG - The receiver allows you to select
from 0 to 1 decimal places in records containing bearing
information.
xxx loads the port by - The NMEA 0183 standard limits the port
baud rate to 4800 bits per second. It is impossible to turn on
every NMEA 0183 data record on one port in the receiver at a
once per second output rate, due to the NMEA standard limi-
Configuration
Version 3.0

Advertisement

Table of Contents
loading

Table of Contents