Troubleshooting Guide - NorthStar MX500 Operator's & Installation Manual

Installation Notes
Once the Dual Control IM is enabled, CFG1/Dual Control
screen looks like this:
Mode:
Dual Control:
GPS Source:
Integrity Alarm:
GPS Source:
Dual Status:
To enable the functionality of the Dual Control Integrity Monitor-
ing, you must set the following to:
Dual Control:
GPS Source:

Troubleshooting Guide

The MX 500 is virtually maintenance free. There are, however, a few
important points to note.
Please check your installation carefully before returning the MX 500 to
the dealer or factory for service. A few troubleshooting tips follow.
The MX 500 performs a variety of self tests during normal operation. If a
function fails the self test, the navigator will display an Internal Error
message every one minute.
Version 3.0
DUAL CONTROL
Master (options: Master, Slave)
Yes
Automatic (options: Automatic, Master,
Slave)
Yes
Master (options: Master, Slave)
OK
Yes
Automatic
(options: Yes, No)
(options: Yes, No)
(options: OK, No Comm, Mirroring)
Installation Manual
225