NorthStar MX500 Operator's & Installation Manual page 88

Operator's Manual
Keep in mind that these are the fixed calculated values between these
two coordinates and not the real time changing values that you will
see in the navigate screens between your present position and your
next waypoint during normal navigation.
Below Waypoint 0 is the waypoint you defined in the GOTO func-
tion. Notice that this information is in standard video, black charac-
ters on a white background, and that an ETA time is displayed in the
same position as the waypoint passed time in Waypoint 0. This indi-
cates that the waypoint has not been passed yet. Remember that the
ETA time is filtered over time, so allow a few minutes for the filter to
settle when you first get underway or make course and speed changes.
74
Plot
Version 3.0