Creating A Route Using The Goto Key - NorthStar MX500 Operator's & Installation Manual

Operator's Manual

Creating a Route Using the GOTO Key:

Using the GOTO function key is the fastest way to create a single leg
route. Using this method will cause the existing active route to be
erased and overwritten with the new position you define.
1. From any screen, press the GOTO key.
2. Press the EDIT key.
3. Using the left or right arrow keys, highlight the softkey desired
and press the ENT key:
34
Waypoint Number - allows you to choose a waypoint stored in the
Waypoint Bank. This feature is nice to use if you already
know the waypoint number that you want to go to and you
don't want to waste time scrolling through the available
waypoints. Enter the number of the waypoint, verify that the
coordinates are correct, and press the EDIT key to copy the
waypoint to the active route.
Choose In Bank - allows you to scroll through the Waypoint Bank.
Align the cursor with the desired waypoint and press the EDIT
key. The waypoint is automatically inserted into the active
route and the unit will revert to the NAV screens, displaying
bearing and distance to this waypoint.
Route
Version 3.0