NorthStar MX500 Operator's & Installation Manual page 190

Operator's Manual
Table D-1. Master/Slave Common Database
Present Position
Time
Date
Routes
Waypoints
Reset XTE
DGPS Setup
Dual Control Alarms
Man Over Board
The items detailed in Table D-2 are independently controlled at the
individual CDU heads.
Table D-2. Independently Controlled Functions
Plotter Setup
GPS Engineering
Display
Dual Control Setup
Lighting Setup
DGPS Displays (slave
reflects the conditions
in master)
NMEA Out
Waypoint Sorting
176
Data Base
Update once per second
Update once per second. Displayed in the same mode
on both units.
Only one unit can make changes at any given time.
Only one unit can make changes at any given time.
Only one unit can make changes at any given time.
Only one unit can make changes at any given time.
Only one unit can make changes at any given time.
Data Base
Navigate Displays
Position Displays
Auxiliary Displays
Tide Displays
GPS Displays (slave reflects the
conditions in master)
Printer Out 2
Multiple Unit Control
Comments
Comments
Version 3.0