Table of Contents
Advertisement
Performing an
OVERALL RESET
OVERALL RESET using
control elements on the CPU
OVERALL RESET from the
PG
Loading the memory card
and calling OB 39
CPU 948 Programming Guide
C79000-G8576-C848-04
Regardless of whether you or the system program requested the
OVERALL RESET, you perform the OVERALL RESET as follows
(initial status: STOP LED flashing quickly):
Action
Hold the reset switch in the
OVERALL RESET position. At
the same time, change the mode
selector from STOP to RUN and
back to STOP again (refer to
Fig. 4-1).
Action
Activate the PG function "delete
blocks".
Note
In contrast to the CPU 946/947, you can also initiate an
OVERALL RESET on the CPU 948 in the RUN mode. In this
case, the CPU automatically changes to the STOP mode and the
OVERALL RESET is then performed.
During the OVERALL RESET, all the LEDs are unlit apart from
the INIT and BASP LEDs.
Once the OVERALL RESET is completed, the only permitted
start-up mode is then a COLD RESTART.
After performing the OVERALL RESET, the memory card is loaded
(provided it is plugged in) following which OB 39 is called.
STOP Mode
Result
An OVERALL RESET is
performed. The STOP LED is lit
continuously.
Result
An OVERALL RESET is
performed. The STOP LED is lit
continuously.
4 - 15
Advertisement
Table of Contents
