Setting Mode; Easy Mode; Monitor Mode - Toshiba TOSVERT VF-AS3 Instruction Manual

(2)

[Setting mode]

• Parameters are set in this mode.
• All the parameters are displayed.
• [Easy mode] is also available in which only the registered parameters are displayed.
(3)

[Easy mode]

• Parameters are set in this mode.
• In this mode, only the registered parameters are displayed.
(4)

[Monitor mode]

• You can check the status such as the operation status of the inverter and terminal information.
The following are the top screen of each mode and how to switch between them.
When switching with the [F1] - [F4] keys
STOP 0.0Hz
12:38
Parameter Setup Mode
1. History function
2. Direct access
3. Guidance function
4. Basic parameters
5. Extended parameters(F - - -)
Top View Monitor
[Setting mode]
F3
RUN 20.0Hz
Top View Mode
20.0
Easy Keypad Copy Monitor
F1
F1 F4
F4
STOP 0.0Hz
Status Monitor Mode
Direction of rotation
Forward
Output current
Frequency reference
20.0Hz
DC bus voltage
Output vol with filter
Top View Easy Parameter
[Monitor mode]
3-5
12:40
[Standard mode]
Hz
F1
F1
STOP
Easy parameters
: Run command select
CMOd
: Frequency command 1
FMOd
: Acceleration time 1
ACC
: Deceleration time 1
dEC
: Upper limit frequency
UL
Top View
F4
[Easy mode]
F2
12:38
0%
0%
0%
3. [Basic operation] Operation panel and screen display
E6582062
3
9
10
0.0Hz
12:38
1
10
10.0s
10.0s
60.0Hz
Monitor