<F701: Current, voltage units select>
Select the unit of current/voltage displayed on the operation panel among % or A (ampere)/V (volt).
For details, refer to [5. 1. 7].
<PSEL: Parameter mode select>
Select the parameter mode between [Setting mode] and [Easy mode].
For details, refer to [5. 1. 8].
4. 2. 2
This inverter has basic parameters and other three types (with F, A, and C) of parameters.
Basic parameter
Basic parameters for inverter operation.
4
Extended parameter
Parameters used for complicated operation and detailed setting. They are represented as "F" and a 3-
digit number.
Advanced parameter
Parameters used for My function, etc. that allows simplified
programming. They are represented as "A" and a 3-digit
number.
Communication parameter
Parameters to set communication function. They are
represented as "C" and a 3-digit number.
9
Since <F---> and <C---> types includes many parameters,
select them on a screen that displays parameters by the hundred and then on an individual screen.
On the selection screen of parameters, titles, parameter
names, and setting values (right end) of the parameters are
displayed.
4. 2. 3
Set parameters in the following procedure.
Select an item for some parameters and set a value for others.
4. [Basic operation] Operation methods of motor
Basic parameters and extended parameters
Basic operation of parameter setting
Basic parameters
4
Extended parameters (F ---)
5
Advanced parameters (A ---)
6
Communication parameters (C ---)
7
Changed parameters search & edit
8
Top
Extended parameters (F ---)
Input/output parameters (F1 - -)
3.1
Frequency parameters (F2 - -)
3.2
Operation parameters (F3 - -)
3.3
Motor parameters 1 (F4 - -)
3.4
Acc/dec parameters (F5 - -)
3.5
Top
4-14
E6582062
STOP
0.0Hz
14:38
Setting Mode
0
Monitor
STOP
0.0Hz
14:36
0
Monitor