Emergency Off - Toshiba TOSVERT VF-AS3 Instruction Manual

3. 2. 3
To apply emergency off from the operation panel except when the inverter is operated by the operation
panel, follow the procedure below.
For how to apply emergency off by other than the operation panel (digital input, etc.), refer to [6. 30. 4].
1 Press the [STOP/RESET] key.
In [Standard mode], "Emergency off? (STOP) key"
is displayed on the lower side in the main areas.
In the cases of "Setting mode" and "Monitor mode,"
just
3
2 If you press the [STOP/RESET] key again while
off.
• The backlight turns red, and "E" blinks.
• "Trip" is displayed in the second position from the
left of the status area.
• "Emergency off" is displayed in the main area.
9
Memo
3. [Basic operation] Operation panel and screen display

Emergency off

blinks at the left end of the status area.
blinks.
is blinking, the inverter comes to emergency
• The blinking returns to the original display status after few seconds if no operation is
performed.. The inverter comes to emergency off only if you press the [STOP/RESET] key
while is blinking.
• If you want to return only the backlight from red to white, press the [F2] key.
EOFF
Easy
Easy
3-14
E6582062
STOP 0.0Hz
13:10
Top View Mode
0.0
Hz
Emergency off ?
Keypad Copy Monitor
TRIP 0.0Hz
13:12
Top View Mode
E
Emergency off
Copy Monitor