Toshiba TOSVERT VF-AS3 Instruction Manual page 132

The basic parameter screen is displayed.
Check that the setting value of <Fr: Panel Fwd/Rev
run select> is "2."
Memo
4
6 Press the [ESC] key or [F1] to [F4] keys to switch
to the [Standard mode] screen.
• Icon of direction of rotation
Only when the [FWD]/[REV] key is enabled,
upper right of the screen.
When the motor is running forward,
highlighted. When it is running reversely,
highlighted.
9
The following are always displayed in the status area on the upper side of the screen
regardless of display mode. (From the left)
• The
• Operation status "RUN"
• Output frequency (display contents vary depending on the setting of the parameter)
• Run command icon
Memo
7 When you press the [FWD/REV] key, the direction
of rotation of the motor is switched to reverse run.
The motor decelerates and shows 0.0 Hz once.
Then, it accelerates to the frequency command
value set with <FC: Panel run frequency> and
becomes stable.
You can check the direction of rotation of the motor
with the following display.
• The
4. [Basic operation] Operation methods of motor
• When you select "1: Rev run" and press the [OK] key, the motor decelerates and starts reverse
run. [FWD/REV] key operation is not possible.
is displayed in the mode name area in the
icon is rotating (clockwise for forward run)
• You can also check the direction of rotation of the motor on the [Monitor mode] screen. For
details, refer to [8. 1. 1].
icon is rotating counterclockwise
: Panel Fwd/Rev run
Fr
: tHrA
tHrA
: Motor OL characteristic
OLM
: FM function
FMSL
: FM
FM
Easy
is
is
Easy
4-24
E6582062
RUN 30.0Hz
15:33
Basic parameters
2
4.00A
0
0
100.0%
RUN 30.0Hz
15:33
Standard Mode
30.0
Hz
Screen Copy Monitor
RUN 30.0Hz
15:33
Standard Mode
30.0
Hz
Screen Copy Monitor