With Parameters For Which A Value Should Be Set - Toshiba TOSVERT VF-AS3 Instruction Manual

■ With parameters for which a value should be set

For an example, here is a procedure to set the basic parameter <ACC: Acceleration time 1>.
At that time, the current setting value, unit, setting lower limit (Min:), and setting upper limit (Max:)
are displayed.
1 Change the value with the touch wheel.
When you touch the touch wheel, the value is
highlighted, and you can change setting. When
highlighted, the setting value is being changed.
With the [F1] to [F4] keys, the following digits are
changed.
4
Key
F1
F2
F3
F4
9
2 Press the [OK] key.
The setting value is changed, and the screen
display returns to the previous one.
Memo
4. [Basic operation] Operation methods of motor
Display
Change the digit that is the minimum digit x
x 1000
1000
Change the digit that is the minimum digit x
x 100
100
x 10 Change the digit that is the minimum digit x 10
Change the minimum digit of the value
x 1
displayed
• For details of the function and adjustment range of <ACC: Acceleration time 1>, refer to [5. 1.
4].
ACC
Min: 0.0
X1000
Meaning
: Run command select
CMOd
: Frequency command select 1
FMOd
: Acceleration time 1
ACC
: Deceleration time 1
dEC
: Upper limit frequency
UL
Top
4-18
E6582062
STOP 0.0Hz
15:12
:Acceleration time 1
25.0
s
Max: 6000.0
X100 X10 X1
Digit to be changed in this
example
100 sec
10 sec
1 sec
0.1 sec
STOP 0.0Hz
15:12
Easy Mode
0
1
25.0s
10.0s
60.0Hz
Monitor