Setting Items In Db Buffering Settings - Mitsubishi Electric GOT 1000 Series Manual

6.9.2

Setting items in DB buffering settings

Configure the settings for the DB buffering function.
For the DB buffering function, refer to the following:
5.1.10 DB buffering function
(1) DB buffering capacity (Range: 16MB to 512MB, Default: 64MB)
Set the capacity used for DB buffering out of the entire CF card capacity within the following range.
Maximum capacity = CF card capacity - 32M bytes
(2) DB buffering status
(a) Select a tag component into whose device whether data are currently accumulated in the DB buffer or not
is stored.
Tags that have a tag component with [Array setting] cannot be selected.
(b) Data are stored as follows depending on the data type.
Data type of tag component
Bit
String
Other than the above
(3) No. of DB bufferings
(a) Select a tag component into whose device whether data are currently accumulated in the DB buffer or not
is stored.
Tags that have a tag component with [Array setting] cannot be selected.
(b) Data are stored as follows depending on the data type.
Data type of tag component
Bit
String
Other than the above
OFF : Not accumulated
ON : One or more data accumulated
"0" : Not accumulated
"1" : One or more data accumulated
0 : Not accumulated
1 : One or more data accumulated
OFF : Not accumulated
ON : One or more data accumulated
"0" : Not accumulated
1 or greater : Number of buffering data that are accumulated
0 : Not accumulated
1 or greater : Number of buffering data that are accumulated
Description
Description
6.9 Option Setting
1
2
3
4
5
6
7
8
6 - 81