Setting Communication Interface (Communication Settings) - Mitsubishi Electric GOT 1000 Connection Manual

2.2.3

Setting communication interface (Communication settings)

Set the GOT communication interface with [Communication Settings] and [Ethernet] of GT Designer2.
Select the communication driver installed on the GOT for drivers to be set for each communication interface.
For details on [Communication Settings] and [Ethernet] of GT Designer2, refer to the following manual.
GT Designer2 Version
1 Communication settings
1 Set the channel No. to [1].
2 Set the driver to [Ethernet(FX)].
3 Set the detailed settings for the driver. (
Screen Design Manual
(When using GT15)
Communication detail settings)
2.2 Preparatory Procedures for Monitoring
2.2.3 Setting communication interface (Communication settings)
1
2
2 - 7