Mitsubishi Electric GOT 1000 Series Manual page 86

(b) Block
Devices of all tag components are arranged as a block.
The size of the block can be changed in [array block size].
For [array block size], refer to the following.
6.5.3 Setting items in Component setting
Usually, the block size need not be changed because it is automatically adjusted to avoid device
duplication.
(Example) When [Length of array] is set to 4 with [block] setting
POINT POINT POINT
When device types are different, [block] cannot be selected.
For the device types, refer to the following.
3.2 GOT Devices Available for the MES Interface Function
6 - 10 6.5 Device Tag Settings
Only the start device (device in n=1) need be set.
Devices in and after n=2 are configured automatically
n=1
Component A GD0
Component B GD1 to GD2 GD8 to GD9
Component C GD3 to GD6 GD10 to GD13
Block
n=2 n=3
GD7 GD14
GD15 to GD16 GD22 to GD23
GD17 to GD20 GD24 to GD27
n=4
GD21