Mitsubishi Electric GOT 1000 Series Manual page 62

(b) Resource data to be sent
1) Settings on the resource data send action for the collected resource data
The GOT sends the resource data before and after turning on the GOT.
Specifying the number of resource data and the time of collecting the data or others are available.
This setting allows the GOT to send resource data when the loads on the GOT and controllers are lower.
Turning on GOT
First action
Second action
Third action
POINT POINT POINT
The GOT sends the resource data to the database only one time. The GOT does not send the sent data to the
database on the subsequent actions. Unnecessary data is not stored to the database.
The GOT may send the sent data to the database in the following cases.
• When turning on the GOT
• When restarting the GOT (Downloading a project data or others)
6.12 Precautions
5 - 12 5.1 DB Interface Function
[Resource data]
Data collected before
turning on GOT *
Data collected after
turning on GOT
Data collected after the
first action
Data collected after the
second action
*Excluding logging data at the first action
Sending data at
the first action
Sending data at
the second action
Sending data at
the third action
Database