Mitsubishi Electric GOT 1000 Series Manual page 148

(7) Operation log file
The GOT displays the operation log file when [Operation log] is selected for [Resource type] only.
Clicking the
The GOT can send the displayed operation log file to the database.
Inputting the data directly to [Drive Name], [Folder Name], and [File Name] are not available.
POINT POINT POINT
When the operation log settings are changed after setting [Transmit resource action], click the
Set operation log file name
The settings for [Operation log file] are not automatically changed.
When the displayed data on [Operation log file] does not exist, an error occurs at the job execution.
(8) Range of data
Specify the maximum number of resource data to be sent for one resource data send action.
When [Operation Log] is selected for [Resource type], [Range of data] is fixed to [Latest data (days specified)].
Latest data
(No. specified)
Latest data
(time specified)
Latest data
(days specified)
All data
For details of *1, refer to the following.
6 - 72 6.8 Job Settings - Actions
Set operation log file name
button to set the operation log file again.
Item
Specify the maximum number of resource data collected in the GOT after the last action.
(Range:1 to 99999, Default:1)
Specify the time period from the job execution time to the specified time for sending the collected resource
data.
*1
(Range:1 to 99999, Default:1 (seconds))
Specify the number of days including in the date at the job execution for sending the resource data. (This
item cannot be specified for sending the logging data, the advanced user alarm data, and the advanced
*1
system alarm data.)
(Range:1 to 400, Default:1 (days))
All the resource data collected in the GOT after the last action.
button displays the stored location for the operation log file.
Description