Cautions For Use - Mitsubishi Electric GOT 1000 Series Manual

CAUTIONS FOR USE

Cautions on the system configuration
(1) GOTs that support the MES interface function
GT16 and GT15 only support the function.
By installing the option OS into a GOT from GT Designer3, the MES interface function can be used.
For applicable models, refer to the following:
2.2 Connection between GOT and Controllers
(2) Option function board that supports the MES interface function
For the option function board that supports the MES interface function, refer to the following:
2.3 Required Equipment, Software and Option OS
(3) Relational databases that support the MES interface function
For the relational databases that support the MES interface function, refer to the following:
2.4.2 Server computer (SNTP server computer)
(4) Connection type used for the MES interface function
To utilize the MES interface function, the Ethernet connection is used.
Install an Ethernet communication unit, and configure the Ethernet setting in Communication Settings of GT
Designer3.
For applicable Ethernet communication units, refer to the following:
2.3 Required Equipment, Software and Option OS
For the Ethernet connection, refer to the following.
GOT1000 Series Connection Manual (Mitsubishi Products) for GT Works3
A - 2