Setting Items In Operation Action - Mitsubishi Electric GOT 1000 Series Manual

6.8.2

Setting items in Operation action

Configure the settings for operation of tag component values.
Up to 20 dyadic operations can be set for one operation action.
1.
Performing the operation for adding or modifying an action displays the [Operation action] dialog box.
Make the setting referring to the following descriptions.
Clicking the
For the operation for adding or modifying an action, refer to the following:
6.8 Job Settings - Actions
Substitution tag
Component
Operation tag
Component
Operator
button
button
Delete row
Tag component data length in job
POINT POINT POINT
Operation actions are executed in order, from the top to the bottom.
6 - 62 6.8 Job Settings - Actions
button after setting adds or modifies the action.
OK
Item
Select a tag or variable to which a value is assigned.
Tags that have a tag component with [Array setting] cannot be selected.
Select or directly enter a component value or a variable of the substitution target.
Select a tag, constant, or variable which is computed.
Tags that have a tag component with [Array setting] cannot be selected.
Select or directly enter a component/constant value or a variable that is to be computed.
Select an operator.
[ ] (None), [+] (Addition), [-] (Subtraction), [
Selecting a row and clicking the
immediately above it.
The
Selecting a row and clicking the
immediately below it.
The
Selecting a row and clicking the
button
Displays the total data length of the tag components in the job.
button reverses the order between the selected row and the one
button cannot be clicked on the first row.
button reverses the order between the selected row and the one
button cannot be clicked on the last row.
Delete row
Description
] (Multiplication), [ ] (Division), [%] (Remainder)
button deletes the row.