NEC univerge sv8100 Installation Manual page 180

Issue 4.0
Conditions
Feature Cross Reference

Telephone Programming Instructions
To enter data for Program 15-07 (Programmable Function Keys):
1.
2.
3.
4.
5.
6.
4 - 34
When a key is programmed using service code 752, that key cannot be

programmed with a function using the 751 code until the key is undefined (000).
For example, with a Park Key programmed by dialing 752 +
undefined by dialing 752 + 000 before it can be programmed as a Voice Over key
by dialing 751 + 48.
When assigning a CAP key,

used, it automatically assigns the next available orbit.
Refer to Function Number
Enter the programming mode.
15 07
15-07-01 TEL301200
KY01 = *01

back select
Enter the number of the item you want to program.
15-07-nn TELnnn
nnnnn

To select the telephone number to be programmed, press the FLASH or the
volume  or  keys.
Enter data for the item you selected + Hold.
Enter data for the next item in the program.
- OR -
Press MSG once to enter a new item number.
- OR -
Press MSG until you exit that series programming section.
08, an orbit number must be used. If orbit 000 is

List.
UNIVERGE SV8100
04 must be
