NEC univerge sv8100 Installation Manual page 171

UNIVERGE SV8100
Description
Use Program 15-07 : Programmable Function Keys to assign functions to a
multiline terminal line keys.
For certain functions, you can append data to the key basic function. For example, the
function 26 appended by data 1 makes a Group Call Pickup key for Pickup Group 1.
You can also program Function Keys using Service Codes.
To clear any previously programmed key, press 000 to erase any displayed code.
Input Data
Default Settings
Item
No.
01
Default
ACD Installation Manual
15-07 : Programmable Function Keys
Extension Number
Line Key
LK01
:
LK08
LK09
:
LK48
Line Key
Number
0~99
(Normal Function Code) (Service Code 751 by
default)
1~48
* 00-* 99
(Appearance Function Code) (Service Code 752 by
default)
Programmable keys 1~8 are Trunk Line keys (key 1 = Trunk Line 1, key 2 = Trunk Line 2,
etc.). All other programmable keys are undefined.
Function Number
 01 (Trunk Line Key)
:
 01 (Trunk Line Key)
0 (No Setting)
:
0 (No Setting)
Function Number
Issue 4.0
Maximum eight digits
Additional Data
1
:
8
0
:
0
Additional Data
Refer to Function
Number List.
4 - 25