Maintenance Schedule - Toro 07211TC Operator's Manual

Maintenance Procedure
Check battery fluid level
Check batterycable connections
Check air cleaner
Lubricate all grease fittings
Inspect the condition and wear of the tires
Check front differential oil level (4WD)
‡Change engine oil and filter
Inspect cooling system hoses
Check governor oil level
✝Check cable adjustments
Check alternator and fan belts
Change air cleaner filter
Check front axle boot joint (4-wheel drive)
Check engine RPM (idle and full throttle)
✝Torque the wheel lug nuts
Check front wheel alignment
Inspect service and parking brakes
Inspect fuel lines
Replace fuel filter
Adjust valves
Replace spark plugs and check timing
✝Replace the transaxle filter
Change the transaxle oil
Clean the transaxle strainer
Pack the front wheel bearings
Change the front differential oil (4-wheel drive)
‡ Initial break in at 50 hours
✝
Initial break in at 10 hours
Replace all interlock switches
Coolant system—flush/replace fluid
Change brake fluid
Replace the timing belt

Maintenance Schedule

Minimum Recommended Maintenance Intervals
Every
50 hours
Maintenance Interval& Service
Every Every
100 200
hours hours
Annual Recommendations
Replace switched, cooland and brake fluid every 1,200
hours or 2 years, whichever occurs first. Replace
engine timing belt every 2,000 hours or 2 years,
whichever occurs first.
52
Every Every
400 800
hours hours