Identification And Ordering - Toro 07211TC Operator's Manual

Identification And Ordering

Model and Serial Numbers
The Workman has two identification numbers: a
®
model number and a serial number. These numbers are
stamped into a plate located on the right frame
member under dash. In any correspondence
concerning the unit, supply the model and serial
numbers to ensure correct information and
replacement parts are obtained.
Note: Do not order by reference number if a parts
catalog is being used; use the part number.
To order replacement parts from an authorized TORO
Distributor, supply the following information:
1. Model and serial numbers.
2. Part number, description, and quantity of parts
desired.
57