Table of Contents
Advertisement
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the first 100 hours
Before each use or daily
Every 100 hours
Every 300 hours
Every 400 hours
Every 800 hours
Every 1,000 hours
Note:
Download a free copy of the electrical schematic by visiting
machine from the Manuals link on the home page.
WARNING
Failure to properly maintain the machine could result in premature failure of machine systems,
causing possible harm to you or bystanders.
Keep the machine well maintained and in good working order as indicated in these instructions.
Maintenance Procedure
• Perform the breaking in a new machine guidelines.
• Inspect the seat belt(s) for wear, cuts, and other damage. Replace the seat belt(s) if
any component does not operate properly.
• Check the tire pressure.
• Check the brake-fluid level.
• Wash the machine.
• Check the condition of the tires and rims.
• Torque the wheel-lug nuts.
• Inspect the steering and suspension for loose or damaged components.
• Check the front wheel camber and toe-in.
• Check the transaxle-fluid level.
• Check the transaxle for leaks.
• Inspect the brakes.
• Grease the front wheel bearings.
• Replace the service and parking-brake pads.
• Change the transaxle fluid.
• Change the brake fluid.
www.Toro.com
31
and searching for your
Advertisement
Table of Contents
