China Post (Hong Kong 2 Of 5) - Honeywell Voyager 1202G-BF User Manual

China Post (Hong Kong 2 of 5)

<Default All China Post (Hong Kong 2 of 5) Settings>
China Post (Hong Kong 2 of 5) On/Off
On
* Off
China Post (Hong Kong 2 of 5) Redundancy
If you are encountering errors when reading China Post (Hong Kong 2 of 5) bar codes, you may want to adjust the
redundancy count. Redundancy adjusts the number of times a bar code is decoded before transmission, which may
reduce the number of errors. Note that the higher the redundancy count, the longer it will take to decode the bar code.
To adjust the redundancy, scan the China Post (Hong Kong 2 of 5) Redundancy bar code below, then scan a redun-
dancy count between 0 and 10 on the Programming Chart inside the back cover of this manual. Then scan the Save
bar code. Default = 0.
China Post (Hong Kong 2 of 5)
Redundancy
China Post (Hong Kong 2 of 5) Message Length
Scan the bar codes below to change the message length. Refer to Message Length Description (page 8-1) for addi-
tional information. Minimum and Maximum lengths = 1-80. Minimum Default = 3, Maximum Default = 80.
Minimum Message Length
Maximum Message Length
8 - 50