Wincor Nixdorf Beetle™ Terminal Default Settings; Wincor Nixdorf Rs232 Mode A; Keyboard Country Layout - Honeywell Voyager 1202G-BF User Manual

Wincor Nixdorf Beetle™ Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf Beetle terminal. The following prefixes are
programmed for each symbology:
Note: If you are having unexpected results with this programming code, scan the
page 1-7 first, then scan the programming code above.

Wincor Nixdorf RS232 Mode A

Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf RS232 Mode A terminal. The following pre-
fixes are programmed for each symbology:

Keyboard Country Layout

If your interface is USB Keyboard or Keyboard Wedge, your keyboard layout default is a US keyboard. To change this layout,
scan the appropriate country code below to program the keyboard for your country or language.
2 - 10
Symbology Prefix
Aztec Code V
Codabar N
Code 93 L
Code 128 K
Data Matrix R
EAN-8 B
EAN-13 A
GS1 DataBar E
GS1-128 P
Wincor Nixdorf Beetle Settings
Symbology Prefix
Code 128 K
Code 93 L
Codabar N
UPC-A A0
UPC-E C
EAN-8 B
All other bar codes M
Wincor Nixdorf RS232 Mode A
Symbology
Interleaved 2 of 5
MaxiCode
MicroPDF417
PDF417
QR Code
Straight 2 of 5 IATA
UPC-A
UPC-E
All other bar codes
Resetting the Custom Defaults
Symbology
EAN-13
GS1-128
Interleaved 2 of 5
Plessey
Straight 2 of 5 IATA
GS1 DataBar
Settings
Prefix
I
T
S
Q
U
H
A0
C
M
Prefix
A
K
I
O
H
E
bar code on