* Object Detection Mode Off
Out-of-Stand
End Object Detection After Good Read
After a bar code is successfully detected and read from the scanner, the laser can be programmed either to remain on and
scanning, or to turn off. When End Object Detection After Good Read is enabled, the laser turns off and stops scanning
after a good read. If you scan Do Not End Object Detection After Good Read, the laser remains on after a good read.
Default = End Object Detection After Good Read.
Do Not End Object Detection
After Good Read In-Stand
Do Not End Object Detection
After Good Read Out-of-Stand
5 - 10
* Object Detection Mode On
In-Stand
Object Detection Mode On
Out-of-Stand
* End Object Detection After
Good Read In-Stand
* End Object Detection After
Good Read Out-of-Stand