Scanner Name - Honeywell Voyager 1202G-BF User Manual

Batch Mode Transmit Delay Medium
(500 ms)

Scanner Name

You may assign a name to each scanner you are using for identification purposes. The default name is "Voyager."
Perform the rename operation using either the bar codes on
where name is the new name for the scanner.
To rename scanners with sequential, numeric names, scan the following bar codes. Scan the Reset code after each name
change and wait for the scanner to relink to the base.
0001
0003
0005
0007
3 - 16
page 3-17, or by sending the serial command :*:BT_NAMname.
Batch Mode Transmit Delay Long
(1000 ms)
0002
0004
0006
Reset