Table of Contents
Advertisement
Default = Record Counter Off.
* Record Counter Off
Record Counter On
Total Records
If you wish to output the total number of bar codes scanned when in Batch Mode, scan Total Records.
Total Records
Batch Mode Output Order
When batch data is transmitted, select whether you want that data sent as FIFO (first-in first-out), or LIFO (last-in first-out).
Default = Batch Mode FIFO.
* Batch Mode FIFO
Batch Mode LIFO
Clear All Codes After Transmission
If you want to clear the scanner's buffer of all data accumulated in Batch Mode after the data has been transmitted to the
host system, scan Clear All Codes After Transmission. If you do not want the buffer cleared after transmission, scan
Don't Clear All Codes After Transmission. Default = Don't Clear All Codes After Transmission.
* Don't Clear All Codes After
Transmission
Clear All Codes After
Transmission
3 - 14
Advertisement
Table of Contents
Troubleshooting
